Technical specifications

body

  • In manufacturing of a body-case and lenses of the device, the following plastics are used: Polycarbonate (PC) (optimum light diffusion, UV resistant, impact resistant and fire resistant);
  • Temperature range from -5 °C up to +40 °C
  • Dimensions: 259 х 167 х 82 mm
  • Weight: 280g (including mounting points)
  • The printed circuit board is protected by silicone compound
  • Water- and dustproof body-case! Ingress Protection Code rated as "dust tight" against moisture and dust is IP66

Lights

  • Bright LED elements:

    Rear Side light (red) - 1 pc;
    Side lights (white) - 2 pcs;
    STOP-light - 1 pc;
    Turn Indicating signals (left and right, yellow) - 2 pcs;
  • Noticeability / visibility up to 500 m (direct view) in any weather condition, and any time of the day or night
  • Distinguishability of signals up to 100 m

Power

  • Power supply: 2 x 3600 mAh lithium-polymer rechargeable batteries (up to 8 hours of battery life in a city-driving mode)
  • Maximum voltage: 8.4 V.
    Minimum voltage (cut-off): 7.4 V.
  • Charging time: 2 hours
  • Charging via USB Type-C port using USB Type-C cable (supplied)

Signal

  • Two Radio Modules operating at a frequency of 2.4 MHz

features

  • Has got a detection- and self-learning system "Friend or Foe" between the main unit and the transmitter. It provides an option for any set of Repeater H-1 devices to be specifically configured to their own encrypted radio channel. At the same time, it is possible to pair with the transmitter up to 10 kits of various devices with repeaters, produced by the Red Cat
  • SOS Emergency system. The system is equipped with a fall-sensor, a collision-sensor, a sound signal, a GPS geolocation and transmission segment, which reports the accident to Special Rescue Services (on a subscription basis - available in most countries), transfers data to the Application 'Resident', and informs next in kin or friends with GPS-data of the accident. Also, the SOS-system has a trigger for switching on to emergency strobe-like flickering mode on the device during an accident, designed for the quickest detection of the rider. (in PRO series)
  • The 'Resident' App allows to route planning of your travel, to find a service-station or a hotel, to communicate with friends, and will assist you in case of emergency (SOS-system). As well as the application provides you with the news, moto-related commercials, and the radio
  • Light level sensors. These automatically switch on additional side lights/running lights of the device when worsen light-condition

Install

  • Three-points fixation: the central pyramid and two platforms with magnets.
  • Mounting to the helmet is made by high-strength Scotch® Tape – 3M
  • AISI 304 stainless steel screws are used for assembling the case
  • A soft, made from polyethylene foam, segment of the inside part of the device repeats the helmet's shape, allowing you to tightly attach the device on the helmet without any gaps

Flexible design of the side elements (for tighter attachment to helmets of different sizes and designs)

Suitable for usage with most of available helmets on the market

Controls

  • The transmitter is powered from the signal system of a motorcycle through a convenient system of connecters, and does not require stripping wires nor any additional battery
  • Multifunctional system is suitable for connecting the transmitter to any of motorcycle systems: 12V, 5V, for positive (+) or negative (-) connection options
  • Handy haptic control buttons
  • Battery level indicator